What glue is used to connect pvc pipes?
一、 PVC水管用什么胶水连接
What glue is used to connect PVC pipes？
1、PVC水管有硬性的水管和软性的水管，而我们在连接水管的时候需要看一下类型。如果是硬性的PVC水管，就要使用专业用的PVC塑料专用胶水，如果是软性的PVC水管，需要用软性的PVC专用胶水，这样子连接的效果才会更加好。
2、连接水管的时候有一种专用的胶，可以看到外包装上面写的是PVC专用胶水，它的粘结效果非常好，而且比较适用于金属与非金属之间的连接，或者塑料与塑料之间的连接。
3、这种胶水有一个性质，就是能够防水，而且即使阳光直射温度比较高，也不用害怕，稳定性还是比较强的。同时还耐腐蚀，所以优势特别多，比较适用于PVC水管的连接。
1. PVC water pipes have hard water pipes and soft water pipes, and we need to look at the types when connecting water pipes. If it is a rigid PVC water pipe, it is necessary to use the specialized PVC plastic glue. If it is a flexible PVC water pipe, it is necessary to use the flexible PVC special glue, so that the connection effect will be better.
2. When connecting the water pipe, there is a special glue. You can see that the outer package is written with PVC special glue. Its bonding effect is very good, and it is more suitable for the connection between metal and non-metal, or between plastic and plastic.
3. This kind of glue has one property: it can be waterproof, and even if the temperature of direct sunlight is relatively high, don't be afraid, and the stability is relatively strong. At the same time, it is also corrosion resistant, so it has many advantages and is more suitable for the connection of PVC water pipes.
二、如何使用PVC水管胶水 How to use PVC water pipe glue？
1、使用之前需要把PVC管道的表面擦拭干净，尤其连接处。
2、接下来把PVC专用胶水均匀地涂抹在管道连接处，涂抹要均匀，同时要把它压实，要把连接处紧密接触，这样子强度就会非常高。
3、连接好之后要等24小时才能够使用，这样子连接的效果就会比较好。
4、涂抹的时候要注意不能够一下子涂的太多，或者是漏涂，可以先涂管道的内侧，然后再涂它的外侧，里外都要涂均匀涂抹，大概要等一分钟左右再施加压力，确保管道的位置连接正确。
5、连接的时候还需要注意，下雨天或者水中不能够操作，要不然使得它的粘性大打折扣。
1. Before use, the surface of PVC pipes should be wiped clean, especially at the joints.
2. Next, apply the PVC special glue evenly on the pipe joint, and at the same time, compact it, close contact the joint, so that the strength will be very high.
3. After the connection is completed, it will take 24 hours to use it, so the sub-connection effect will be better.
4. When applying, pay attention not to apply too much at one time, or to miss the coating. You can apply the inside of the pipe first, and then the outside of the pipe. The inside and outside of the pipe should be evenly coated. It will take about one minute to apply pressure to ensure the correct connection of the pipe position.
5. When connecting, it should also be noted that it cannot be operated in rainy days or in water, otherwise its viscosity will be greatly reduced.
